Meaning Of The Led On The Dmc20 - Siemens SINAMICS S120 Combi Equipment Manual

Additional system components
9.2 DRIVE-CLiQ Hub Module DMC20
9.2.3.4

Meaning of the LED on the DMC20

Table 9- 18 Meaning of the LED on the DMC20
LED Color
READY -
Green
Orange
Red
Green / Red
Green / Orange
or
Red / Orange
Cause and rectification of faults
The following reference contains information about the cause of faults and how they can be
rectified:
SINAMICS S120 Function Manual (FH1)
SINAMICS S120 Combi List Manual
198
Status Description
Off Electronics power supply is missing or outside permissible tolerance
range.
Continuous light The component is ready for operation and cyclic DRIVE-CLiQ
communication is taking place.
Continuous light DRIVE-CLiQ communication is being established.
Continuous light At least one fault is present in this component.
Note:
The LED is activated irrespective of whether the corresponding
messages have been reconfigured.
Flashing light Firmware is being downloaded.
0.5 Hz
Flashing Firmware download is complete. Wait for POWER ON
2 Hz
Flashing light Component recognition via LED is activated (p0154).
Note:
Both options depend on the LED status when component recognition is
activated via p0154 = 1.
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0