Drive-Cliq Coupling; Description; Safety Information; Interface Description - Siemens SINAMICS S120 Combi Equipment Manual

11.2

DRIVE-CLiQ coupling

11.2.1

Description

The DRIVE-CLiQ coupling is used to connect two DRIVE-CLiQ cables in accordance with
degree of protection IP67 acc. to EN 60529.
In addition to the data lines, the power supply contacts of DRIVE-CLiQ are also routed via
the coupling.
You can find information on the permissible cable length in the chapter "DRIVE-CLiQ signal
cables".
11.2.2

Safety information

Note
Only cables from Siemens may be used for DRIVE-CLiQ connections.
11.2.3

Interface description

11.2.3.1

Overview

Figure 11-5
SINAMICS S120 Combi
Manual, Edition 05.2010, 6SL3097-4AV00-0BP0
DRIVE-CLiQ coupling
1 Rating plate
2 Covering caps, Yamaichi, order number: Y-ConAS-24-S
Accessories
11.2 DRIVE-CLiQ coupling
239