Fax Reception Extension - Siemens HiPath 1100 Series Programming Manual

Step by Step
To activate
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 7
Enter a number for an external analog or digital line
(e.g., 801).
... Select the operating mode for the line:
0 5
= Module is deactivated
0
= Fax
1
= DID
2
= Fax/DID
3
= Announcement
4
= AutoFax
5
Enter the number for the next external line available.
or
Press this key.
#
Initial state for Programming Mode.
To deactivate
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
2 7
Enter a number for an external analog or digital line
(e.g., 801).
Enter the code for deactivating Fax/DID reception.
0
Enter the number for the next external line available.
or
Press this key.
#
Initial state for Programming Mode.

Fax Reception Extension

After the detection of a fax signal, the Fax/DID Module
can transfer a call to a preconfigured extension. The DID
Mode does not need to be configured for this feature.
Fax/DID Module
111