Automatic Keypad; Assignment Of An External Isdn Line To A Msn - Siemens HiPath 1100 Series Programming Manual

Programming a Digital Trunk
Step by Step
*
...
0 0 1
...
0 0 1
...
0 0 1
120

Automatic Keypad

Your local carrier can inform you which ISDN features
can be controlled by code in your country.
This feature allows you to activate the appropriate ISDN
function at the terminal, with no need for external
access.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 7
or
Activate/Deactivate Automatic Keypad:
#
*
= To activate
= To deactivate (default)
#
Initial state for Programming Mode.
Assignment of an external ISDN line to a
MSN
This features allows you to assign the MSNs provided
by your local carrier to calls made to ISDN lines.
By default all ISDN lines are assigned to MSNs.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 8
Enter the slot (001... 140) for the MSN.
1 4 0
Enter a number for an external digital line (e.g., 801).
Enter the next MSN slot
1 4 0
or
Press this key.
#
Initial state for Programming Mode.
Deleting Assigned External Lines
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 7 8
Enter the slot (001... 140) for the MSN.
1 4 0