Entrance Telephone; Configuring An Entrance Telephone - Siemens HiPath 1100 Series Programming Manual

Entrance Telephone

Step by Step
98
Enter the MSN number selected:
Example
Slot
001
002
User is at his/her office (3416496):
= This specifies that the MSN number must be
1
= This specifies that an MSN slot (001 ... 140) must
2
Initial state for Programming Mode.
Replace the handset.
At his time, the called destination receives the informa-
tion that the calling number is 3415565, even though
the call has been originated from number 3416496.
Entrance Telephone

Configuring an Entrance Telephone

With the HiPath 1100 you can connect up to four
Entrance Telephones in extension slots. Each Entrance
Telephone must be individually activated in the system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 5
... Select a slot for the Entrance Telephone extension (1 to
1 4
4).
Enter the analog extension number (e.g., 12/102) to be
enabled as an Entrance Telephone.
Repeat these steps for any additional slot.
or
Press this key.
#
Initial state for Programming Mode.
MSN
3415565 - Home
3416496 - Office
used for other features (e.g., 3415565)
be used for other features (e.g., 001)