Hipath 1100 Manager; Hipath 1100 Adsl Manager - Siemens HiPath 1100 Series Programming Manual

HiPath 1100 Manager

Step by Step
136
HiPath 1100 Manager
The HiPath 1100 Manager is an administration software
designed for programming HiPath 1100 systems quickly
and easily by means of a graphical interface without the
need to know programming codes.
The HiPath 1100 Manager can access the C.O. locally
through a USB or V.24 serial interface or remotely via
LAN, that is, as long as a network PC is connected
online to the HiPath 1100 via a serial interface or an
ADSL module. You can also update the HiPath 1100
software using the HiPath 1100 Software Update then
store the database with the system's settings. Refer to
the HiPath 1100 Manager Help file before executing this
procedure.

HiPath 1100 ADSL Manager

HiPath 1100 ADSL Manager is an administration
software designed for programming ADSL modules.
Hardware Requirements:
– 10/100 Base-T network card.
General Information:
– TCP/IP protocol;
– Default IP: 10.0.0.1;
– Default subnet mask: 255.255.255.0.
If you need to reset the IP address and the
subnet mask, use code 013 "Restore ADSL
module default settings."
Do not connect the V.24 interface adapter cable
to the switch when using an ADSL module.
Once ADSL access to the provider is established and
the module is connected to the HiPath 1100, you may
need to make some adjustments for WAN and LAN
use. The HiPath 1100 ADSL Manager application is
designed to help you make these adjustments. It allows
you to view, edit and update your system's configura-
tion.