Programming an Extension
Step by Step
*
68
Only one UCD Subscriber Group may be config-
ured for Voice Mail. This group's extensions are
connected to the server via the HiPath 1100 a/b
pair.
See Voice Mail Protocol
Collect Call Barring by Extension
When Collect Call Barring is activated, all collect calls for
the specified extension are automatically rejected by
the system.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
9 3
Enter the extension number (e.g., 11/101).
or
Activate/Deactivate Collect Call Barring:
#
= To activate
*
= To deactivate (default)
#
Enter the next extension number
or
Press this key.
#
Initial state for Programming Mode.
If a call has been answered at least once by the
system, Collect Call Barring cancels the blocking.
When an incoming call over a digital line is for-
warded for not being answered (*14), and Col-
lect Call Barring is activated, the call will ring at
the First Attendant for the external line.
page 138.