Mitsubishi Electric MELSEC iQ-R Series User Manual page 163

Condition target channel setting [n]
Normal
Set a channel where an interrupt factor is detected.
Setting value
0
1
2
3
4
When an interrupt factor with channel specification is set in 'Condition target setting [n]' (Un\G232 to Un\G247), an interrupt
factor is monitored in the channel set by this area. When an input signal (X) is set as an interrupt factor, the setting in this area
is ignored.
If a value other than the above is set, a condition target channel setting range error (error code: 182H) occurs.
"n" indicates an interrupt setting number. (n = 1 to 16)
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name 1
Condition target channel 264
setting [n]
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■Default value
The default value is All channels (0) for all areas.
Mode switching setting
Normal
Set a setting value for the mode to be switched to.
Switching mode
Buffer memory address
Normal output mode
Offset/gain setting mode
When a value other than the above is set, the mode switching is not executed and only the operating condition is changed.
When a setting value that corresponds to the current operation mode is written and 'Operating condition setting request' (Y9)
is turned on and off, an error does not occur and only the operating condition is changed.
■Buffer memory address
The following shows the buffer memory address of this area.
Buffer memory name
Mode switching setting
■Enabling the setting
Turn on and off 'Operating condition setting request' (Y9).
■After the mode is switched
When the mode is switched, this area is cleared to 0 and 'Operating condition setting completed flag' (X9) turns off.
After checking that 'Operating condition setting completed flag' (X9) is off, turn off 'Operating condition setting request' (Y9).
Wave Synchronization
2 3 4 5 6
265 266 267 268 269
Setting value
296
5260H
4441H
CH1
296, 297
Setting details
All channels
CH1
CH2
CH3
CH4
7 8 9 10 11
270 271 272 273 274
297
4441H
5260H
CH2 CH3
Appendix 3 Buffer Memory Areas
12 13 14 15 16
275 276 277 278 279
CH4
APPX
161
A