5.
Configure the setting to use the module labels and add the module labels of the master/local module.
6.
Set "Required Settings" of the module parameter of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Required Settings]
7.
Set "Network Configuration Settings" of the module parameter of the master/local module as shown below.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings] [Detailed Setting]
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
191