Points to use the wave output function
When 'CH1 Output enable/disable flag' (Y1) is changed
When 'CH1 Output enable/disable flag' (Y1) is turned off during the wave output, the analog output value becomes the offset
value though the wave output is continued. The wave output continues to be updated while 'CH1 Output enable/disable flag'
(Y1) is off. When 'CH1 Output enable/disable flag' (Y1) is turned on, the analog output is restarted.
CPU module status
'CH1 D/A conversion
enable/disable
setting' (Un\G500)
'CH1 Output enable/disable
flag' (Y1)
'CH1 Wave output start/stop
request' (Un\G462)
'CH1 Wave output status
monitor' (Un\G401)
Wave data
Output according to the setting of
'CH1 Output setting during wave
output stop' (Un\G524)
D/A conversion enable (0)
OFF
ON
Wave output stop
request (0)
During wave
output stop (0)
Analog output
Offset value
RUN
OFF
ON
Wave output start request (1)
During wave
During wave
output (1)
output stop (0)
1.14 Wave Output Function
1
1 FUNCTIONS
71