Mitsubishi Electric MELSEC iQ-R Series User Manual page 55

To delete the end point, move the mouse pointer to the point. Then select "Delete end point" from the right-click menu. When
the mouse pointer is on the end point, the display of the mouse pointer is changed to
6.
Set the wave between end points from the right-click menu or in "Specify wave" of "Wave details setting".
Item Setting result
Circular arc The interval of the start point and end point is drawn in a circular arc. When the circular arc is selected, the arc direction can be set in
"Direction"; it can be inverted. The circular arc is drawn in the procedure below.
The arc to be drawn
Start point
Set "Direction".
Straight line The interval of the start point and end point is drawn in a straight line.
Exponential The graph is drawn with an adjustment so that the start point and end point are on the edge points of the exponential function of y = e
function to 10).
Deleted end point
End point
In an upward direction
.
In a downward direction
1 FUNCTIONS
1.14 Wave Output Function
1
x
(x = 0
53