Section 1: Installing the Cabinet
GENERAL PRECAUTIONS
●
To avoid shock or equipment damage, do not plug in or turn the system power on before completing the
installation process.
●
Avoid working with the equipment during electrical storms.
●
Use only commercial AC power to prevent shock or fire.
●
Use the power cord supplied for the cabinet.
●
Do not bundle AC power cords together to prevent the cords from overheating.
●
Make sure the cabinet has a proper earth ground.
●
Install batteries with the correct polarity to prevent damaging equipment.
●
The cabinet should not be placed on unstable surfaces to avoid damage.
INSTALLING THE CABINET
Unpacking
Unpack the equipment and check it against your equipment lists. The cabinet contains a power supply
installed by the manufacturer, however, no PCBS are installed. Inspect for physical damage. If you are not
sure about a component's function, review the information for the component within this manual. Contact
your Sales Representative if you have additional questions.
Make sure you have appropriate tools for the job, including: a test set, a punch down tool, and a digital voltmeter.
Before Installing
Make sure you have a building plan showing common equipment, extensions, the telco demarcation, and
earth ground location. The installation site must meet NEC Unified Solutions specifications in the Standard
Practices Manual (P/N N2710STD**).
Aspire S Hardware Manual
Section 1: Installing the Cabinet
Installing the Cabinet
Section 1:
Section 1: Installing the Cabinet ◆ 1-1
1