Keyset Labeling; Labeling Your Phone (Figure 4-18); Removing The Faceplate; Replacing The Faceplate - NEC Aspire S Manual

Section 4: Telephones and Optional Equipment

KEYSET LABELING

Labeling Your Phone (Figure 4-18)

The Aspire keysets can be easily labeled by removing the clear plastic faceplate on the keysets. These labels
can be printed by hand, typewriter, or by using the Aspire Labelmaker program. Labels for this are on 8 1/2
x 11" paper, which allows for easy printing by any printer - dot matrix, laser, etc.

Removing the Faceplate:

1.

Replacing the Faceplate:

1.
2.
4-26 ◆ Section 4: Telephones and Optional Equipment
At the lower right-hand corner of the telephone, you'll notice a small notch in the faceplate plastic.
Use this notch to help lift the faceplate up.
Each corner has a plastic locking pin which releases as the faceplate is lifted up.
If the faceplate is dropped, these pins may pop out of place. Be careful not to lose the pins.
Figure 4-18: REMOVING THE FACEPLATE
Place the faceplate back on the phone.
At each corner, press the locking pin back into place.
Aspire S Hardware Manual