Installing A 24-Button Dls Console - NEC Aspire S Manual

Installing a 24-Button DLS Console

1. Turn the keyset over which will have the 24-Button DLS Console installed.
2. If only one adapter is to be installed on the phone, the console should be installed on the right-hand
side of the phone (beneath the handset). Using a flat-head screwdriver, remove the plastic punch-
out piece covering the connector.
the left in order to accommodate the cable.
3. Plug the 24-Button DLS Console into the connector on the bottom of the keyset.
4. Push the cable from the console into the cable channel to allow the phone to rest flat.
5. Install the connector plate provided with the 24-Button DLS Console to the bottom of the console
and phone to join the two sets together.
Aspire S Hardware Manual
Section 4: Telephones and Optional Equipment
If a second adapter is required at a later time, the console connection will need to be moved to
DLS
Figure 4-13: INSTALLING THE CONNECTOR PLATE
Figure 4-14: INSTALLED 24-BUTTON DSS CONSOLE
Section 4: Telephones and Optional Equipment ◆ 4-13
Screw
Metel bracket
Attach metal
bracket
Channel for cable
Telephone
4