NEC Aspire S Manual page 140

Section 4: Telephones and Optional Equipment
8.
9.
Tape Recorder
OR
Line in
Figure 4-28: CONNECTION FOR
RECORDING ONLY
10. Position the adapter with the connector positioned as shown below.
11. Hook the two plastic prongs into the bottom of the phone.
12. Push the connector into place. The top latch on the top of the adapter should lock into place when it
13. In order for the ADA adapter to recognized correctly, before plugging in the keyset, make sure that
14. Plug the line cord back into the keyset.
15. Check Program 10-03-04 or 10-03-05 to make sure the system recognizes the ADA adapter.
4-34 ◆ Section 4: Telephones and Optional Equipment
Replace the adapter cover and reattach the screw.
Connect the opposite end of the cable to the recording device or audio input.
Make sure to connection the cable to the audio input (for example, on the PC's sound card).
Plugging the adapter into any other connector may damage the ADA adapter.
ADA Module
T6
T7
CN2
Figure 4-30: POSITIONING THE ADAPTER
is properly positioned.
in Program 10-03-01, the extension number to be used for the ADA adapter is undefined.
To avoid any hardware problems, when removing the adapter, first unplug the line cord, then
the power cord, then any other adapter cables.
Tape Player
Miniplug
CN2
Ear Phone
Figure 4-29: CONNECTION FOR
PLAYBACK ONLY
ADA Module
Aspire S Hardware Manual