Dspdb Daughter Board (Figure 2-4, Figure 2-5); To Install A Dspdb Daughter Board - NEC Aspire S Manual

DSPDB Daughter Board (Figure 2-4, Figure 2-5)

The DSPDB provides the option for the VRS (Voice Response System) feature. This daughter board is
mounted on the CPU and provides:
●
8 VRS Circuits with a VRS Flash Card Installed (replays up to 8 circuits simultaneously; records up to 8 cir-
cuits simultaneously)
● Compact Flash Slot for VRS or IntraMail Feature
There are no DTMF receivers provided when this daughter board is installed on the CPU.

To install a DSPDB Daughter Board:

1. Included with the DSPDB are four spacers. Install one spacer in each corner of the daughter board.
Make sure to attach the spacers from the back of the daughter board so when installed, the compact
flash slot is facing up.
2. Position the daughter board over the CN4 connector on the CPU. Push the board into the connector
on the CPU. Gently push the corners of the daughter board down so the spacers lock into the CPU.
pull the daughter board off.
Aspire S Hardware Manual
Section 2: PCB Installation and Startup
To remove the daughter board, use pliers to squeeze the top of the spacers together, then gently
CN1
CN4
Figure 2-4: DSPDB DAUGHTER BOARD INSTALLATION
DSPDB
Spacers
CPU
Section 2: PCB Installation and Startup ◆ 2-13
2