Installing An 4Sliu-S Pcb - NEC Aspire S Manual

Installing an 4SLIU-S PCB:

1. If the 4SLIDB-S is to be used, install this prior to inserting the 4SLIU-S PCB into the cabinet.
2. Install the 4SLIU-S into the slot.
3. Tighten the screw on the PCB to secure the card to the cabinet.
Aspire S Hardware Manual
Section 2: PCB Installation and Startup
CN5 4SLIDB Connector
LD1 PCB Status LED
LD2 - LD5
Line Status LEDs
CN4
SLIDB PCB
Earth Ground Connection
CN3
Figure 2-8: 4SLIU-S INSTALLATION
Section 2: PCB Installation and Startup ◆ 2-21
2