NEC Aspire S Manual page 193

3. Insert the wall-mount hookswitch tab in the slot below the hookswitch (Figure 4-93).
4. After removing the integrated wall bracket from the bottom of the 2-button telephone (Figure 4-92),
position the bracket as shown below - the legs of the bracket should slide into the slots located near
the bottom edge of the phone, then be pushed up slightly to secure the bottom of the bracket.
5. Attach the wall-mount bracket to the phone using the two screws which initially held the bracket to
the phone. The screws should be positioned at the top of the bracket.
Aspire S Hardware Manual
Section 4: Telephones and Optional Equipment
Figure 4-93: INSTALLING THE HOOKSWITCH HANGER
Figure 4-94: ATTACHING THE BRACKET
Section 4: Telephones and Optional Equipment ◆ 4-87
4