Programming - NEC Aspire S Manual

To ESIU PCB
CN1
CN2
CN3

Programming

➻
➻
➻
➻
Aspire S Hardware Manual
Section 4: Telephones and Optional Equipment
CN2 or CN3
PGDAD Module
Figure 4-16: 2PGDAD CABLE CONNECTION
10-03-01 : PCB Setup - Terminal Type (Circuit 1)
10-03-06 : PCB Setup - Terminal Type (Circuit 2)
Confirm that the 2PGDAD has defined the circuit types as either type "7" for External Ringer
or "9" for ACIs. (If the 2PGDAD circuit had previously been defined for another type of cir-
cuit, unplug the 2PGDAD and plug it back in order to reset the circuit types.)
10-05-01 : General Purpose Relay Setup
Define which relay circuits (5-8) on the 2PGDAD Module are used for General Purpose
Relays.
11-06-01 : ACI Extension Numbering
Assign extension numbers to ACI software ports. Select a number outside of the normal
extension number range.
Aspire S: ACI Ports 1-8
Aspire: ACI Ports 1-96
11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a user dials the pilot number, they reach an avail-
able ACI software port within the group.
Aspire S: ACI Groups 1-4
Aspire: ACI Groups 1-16
Section 4: Telephones and Optional Equipment ◆ 4-21
External Ringer
OR
External Recording System
4