Wall-Mounting The Slt Adapter - NEC Aspire S Manual

Wall-Mounting the SLT Adapter

1. Unplug the two line cords from the SLT Adapter.
2. Remove the two screws from the front of the SLT Adapter.
3. Lift the cover off the adapter.
4. Using the two screws provided with the
SLT Adapter, attach the back cover to the
desired location.
Tighten two screws
Figure 4-58: ATTACHING THE UNIT
5. Replace the front cover and the two screws removed in Step 2.
6. Plug the two modular line cords back into the SLT Adapter which were removed in Step 1.
Aspire S Hardware Manual
Section 4: Telephones and Optional Equipment
Section 4: Telephones and Optional Equipment ◆ 4-59
Figure 4-57: REMOVING THE COVER
4