Pioneer 1200 Maintenance Service Manual page 252

16
MC012C-AS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK
Unitized Transaxle Removal, Continued:
YELLOW
WHITE
Figure 16-18 Generator Wires
WHITE/BLACK
WIRE
BLACK
WIRE
Figure 16-20 Engine Kill Switch Wire
7. Disconnect the brake hoses and park brake cables.
7.1. Remove the park brake cable clip (1), hair spring cotter pin (2) and clevis pin (3) (Figure 16-21,
Page 16-11).
7.2. Remove the cable from the cable support bracket (Figure 16-21, Page 16-11).
7.3. Remove the upper shock mounting hardware from the rear shock absorber and remove the shock
absorber.
7.4. Use a 3/8-inch flare nut wrench and remove the brake hose from the rear brake cluster. To avoid
spilling brake fluid, lift the hose above the brake cluster assembly (Figure 16-22, Page 16-11).
Page 16-10 2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
GROUND
Figure 16-19 Oil Level Sensor Jumper Wire
Unitized Transaxle Removal
STARTER/
GENERATOR
YELLOW
OIL LEVEL
SENSOR
JUMPER
WIRE