Pioneer 1200 Maintenance Service Manual page 261

MC012C-AS00 UNITIZED TRANSAXLE WITH DIFFERENTIAL LOCK
22. Connect the engine kill switch wire (18-gauge white/black stripe) to the bullet connector at the lower right
front of the engine (Figure 16-48, Page 16-19).
23. Install three wire ties to secure the engine kill wire and accelerator cable.
24. Connect the oil level sensor wire (18-gauge yellow) to the jumper wire (Figure 16-50, Page 16-21).
Figure 16-46 Leaf Springs
WHITE/BLACK
WIRE
BLACK
WIRE
Figure 16-48 Ignition Kill Wire
2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual
Unitized Transaxle Installation
Figure 16-47 Leaf Springs and Shackles
16
Page 16-19