Buffer Memory Address Comparison - Mitsubishi Electric MELSEC-A/QnA Series Handbook

4
TEMPERATURE INPUT MODULE REPLACEMENT

4.2.4 Buffer memory address comparison

Sequence program change is required as the assignment of buffer memory differs.
For details of buffer memories and sequence programs, refer to the Thermocouple Input Module/
Channel Isolated Thermocouple/Micro Voltage Input Module User's Manual.
A616TD
Address
Name
(hex)
00 Data format selection
01 Error code storage
Error occurrence A60MXCONNECT No.
02
storage
Thermocouple type setting error channel
03
number storage
04 Current sampling period storage
05 to 0E System area (Not used)
0F Conversion enable/
10 to 17 disable specification
18 Setting data set request
19 to 1F System area (Not used)
Disconnection detection enable/disable
20 to 27
specification
28 to 2F System area (Not used)
30 to 3F Digital output value temperature setting
Disconnection detection channel number
40 to 47
storage
48 to 4F System area (Not used)
Digital output value out-of-range
50 to 57
Channel number storage
58 to 5F System area (Not used)
Detected temperature value out-of-range
60 to 67
Channel number storage
68 to 6F System area (Not used)
INPUT channel
70 to 7F
Digital output value storage
80 to FF Error correction value setting
100 to 17F Thermocouple type setting
MX CH.channel
180 to 1FF
Digital output value storage
MX CH.channel
200 to 27F
Detected temperature value storage
4
- 9
Read/write
R/W
R
-
A616TD
Multiplexer module R/W
-
R/W
-
R/W
-
R/W
-
R/W
-
R
R/W
R
Q64TD
Address
Name
(hex)
00 Conversion enable/disable setting
01 CH1 Time/count averaging setting
02 CH2 Time/count averaging setting
03 CH3 Time/count averaging setting
04 CH4 Time/count averaging setting
05 to 08 System area (Not used)
09 Averaging processing selection
0A Conversion completion flag
0B CH1 Measured temperature value
0C CH2 Measured temperature value
0D CH3 Measured temperature value
0E CH4 Measured temperature value
0F to 12 System area (Not used)
13 Error code
14 Setting range
15 to 2E System area (Not used)
2F Warning output enable/disable setting
30 Warning output flag
31 Disconnection detection flag
32 CH1 Scaling value
33 CH2 Scaling value
34 CH3 Scaling value
35 CH4 Scaling value
36 to 3D System area (Not used)
3E CH1 Scaling range lower limit value
3F CH1 Scaling range upper limit value
40 CH2 Scaling range lower limit value
41 CH2 Scaling range upper limit value
42 CH3 Scaling range lower limit value
43 CH3 Scaling range upper limit value
44 CH4 Scaling range lower limit value
45 CH4 Scaling range upper limit value
46 to 4D System area (Not used)
4E CH1 Scaling width lower limit value
4F CH1 Scaling width upper limit value
50 CH2 Scaling width lower limit value
51 CH2 Scaling width upper limit value
52 CH3 Scaling width lower limit value
53 CH3 Scaling width upper limit value
54 CH4 Scaling width lower limit value
55 CH4 Scaling width upper limit value
56 CH1 Warning output lower/lower limit value
57 CH1 Warning output lower/upper limit value
Read/write
R/W
-
R/W
R
-
R
-
R/W
R
R/W
-
R/W