Setup - Mitsubishi Electric R56TB Instruction Manual

16.5.6.

Setup

Tap the Setup button.
Here, the timing to collect the information for Maintenance Forecast, the notification method and other items
can be set up.
When the [Write Parameters] button (<a>) is tapped after setting each item, the setting values are written
into the controller. All items other than the signal numbers of dedicated outputs take effect after they are
written into the controller. If a dedicated output signal has been changed, it is necessary to power on the
controller again.
For more information about the setup items, see "Tab. Setup Screen"
CAUTION
Information needed to "Maintenance Forecast" is not accumulated
Factory preset value is invalidity. When the
Maintenance Forecast is invalidated, information
of Maintenance Forecast is not accumulated.
When switched effectively from invalidity again,
the reservoir of information is continued from the
last value. If you have invalidated the
Maintenance Forecast for a long term,
correct maintenance times cannot be
calculated.
while the Maintenance forecast is being invalidly set.
Reservoir of information
the
Maintenance Forecast
Effective
invalidity
135
<a>
time
Information is accumulated.