Edit Of Position Data For Sq Direct Function - Mitsubishi Electric R56TB Instruction Manual

11.3.2.

Edit of position data for SQ Direct Function

The procedure of direct input of the numerical value is shown.
1) Select the position data to edit (<a>) and tap the [Edit] button (<b>). The data edit screen is displayed. (<c>)
2) Tap the [Edit value] button (<d>). The data input screen is displayed. (<e>)
3) The data is inputted into each coordinate value, tap the [OK] key (<f>), and finish the data input.
4) The structure flag can be edited by the [Edit FLG1] button (<g>). The multi-rotation flag can be edited by the
[Edit FLG2] button (<h>).
5) Tap the [OK] button (<j>) if edit of all the data is completed. The selected position data is registered to the
controller.
<a>
<b>
CAUTION
When the [OK] button of the data edit screen is tapped, the selected position data is written to the
controller.
<c>
<e>
<f>
68
<d>
<j>
<g>
<h>