16.4.2.
Releasing the brake of one axis
For releasing the brake of one axis, press [+] button of J1~J6 after doing (1) operation.
The brake is released only while the button is being pressed.
16.4.3.
Releasing the brakes of two of more axes
For releasing the brakes of two or more axes, do following operation after doing (1) operation.
1. Select axes to release the brakes.
2. Press [EXE] button. The brake is released only while the button is being pressed.
If [Close] button to the brake release screen is tapped, the brake release operation is ended.
130