Description; Panel Overview; Subframe; Switchpanel Pole - Siemens 8DA10 Series Installation And Operating Instructions Manual

861-9601.9 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • Revision 11

Description

6

Panel overview

6.1

Subframe

• Support for switchpanel poles and panel front
• Forms the cable compartment
• Subframe versions
- Standard: Switchgear height 2350 mm
- Higher version: Switchgear height 2570 mm
6.2

Switchpanel pole

• Poles arranged one behind the other.
• One switchpanel pole consists of a vertically arranged housing
(e.g. with integrated vacuum interrupter).
• The busbar housing with integrated three-position disconnector is mounted horizontally
over the switchpanel pole.
Fig. 3: 8DA10 circuit-breaker panel
① Low-voltage compartment (standard heights: 850/1200 mm)
②
SIPROTEC bay controller (option)
③ Indication and control board for three-position disconnector with circuit-breaker position indicator
④
Manometer for gas monitoring of the switchpanel pole housing
⑤ Gas filling valve
⑥ Control board for circuit-breaker
⑦ Voltage detecting system
⑧ Frame
⑨
Cable compartment
Description
11/214