Siemens 8DA10 Series Installation And Operating Instructions Manual page 144

Installation
144/214
➭ Tighten all bolts at the termination plate and the front end cover.
➭ Bolt the rear end cover to the frame using 3 bolts M8x20.
Fig. 173: Fixing points for rear end cover
➭ Hook in the upper arc protection walls, and fix loosely using bolts.
Fig. 174: Fixing points for upper arc protection walls
➭ Hook in the upper arc protection walls, and fix loosely using bolts.
Fig. 175: Fixing points for central arc protection walls
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
①
Front end cover
② Middle left arc protection wall
③
Middle right arc protection
wall
④ Rear end cover
① Front end cover
②
Middle left arc protection wall
③ Middle right arc protection wall
④
Rear end cover