Aseismic Design (Option) - Siemens 8DA10 Series Installation And Operating Instructions Manual

Description
Seismic withstand
capability (option)
28/214
15

Aseismic design (option)

8DA10 switchgear can be upgraded for operation in regions at risk from earthquakes,
see the relevant order and delivery documents.
The additional components for earthquake-resistant design are pre-assembled at the factory.
Fig. 13: Earthquake-resistant panel design
The earthquake-resistant design is bolted to the foundation rails at all 4 points on site,
using a floor fixing profile.
Fig. 14: Floor fixing profile
Revision 11 • INSTALLATION AND OPERATING INSTRUCTIONS • 8DA10 • 861-9601.9
① Reinforced side plate
②
Additional fixing elements between
the switchpanel poles