Table of Contents
Advertisement
4.4.4 Installation of the bushing on the transformer
Overview
It is important to install the draw rod correctly, thus the ends of the draw rod parts must make contact at (67).
CAUTION!
Do not disassemble the joints (52), these are correctly assembled and locked with tread-locking
fluid by Hitachi ABB Power Grids.
Procedure
1.
Connect the upper draw rod (35) to the lower
draw rod (4).
Installation and commissioning guide
1ZSC000563-AAF EN, REV. 4, 2021-06-23
31
Advertisement
Table of Contents
