Table of Contents
Advertisement
4.6 Hydraulic tightening of the draw-rod nut
Overview
10
38
Procedure
1.
Measure the distance (a). Measuring is performed
when the draw rod nut is tightened with torque
10 Nm.
Installation and commissioning guide
1ZSC000563-AAF EN, REV. 4, 2021-06-23
Draw rod nut
Hydraulic jack
NOTE!
The bushing is delivered with an
information sheet that specifies the
draw-rod extension (b-a). These values
are measured when the bushing is
manufactured, and are unique to every
unit.
NOTE!
Record the values in Measurement
record, page 83, for future reference.
45
Advertisement
Table of Contents
