Table of parameters that can be changed using the guidance function
Preset-speed setting
auf=2
6.1.4
Automatically adjusting acceleration/deceleration time
: Automatic acceleration/deceleration
Function
This automatically adjusts acceleration and deceleration time in line with load torque and the moment of
inertia.
Refer to section 5.3 for setting acceleration/ deceleration time manually.
=
* Adjusts the acceleration/deceleration time automatically within the range of 1/8 to 8 times as long as the
time set with the or , depending on the current rating of the inverter.
=
* Automatically adjusts speed during acceleration only. During deceleration, speed is not adjusted
automatically but reduced at the rate set with .
Motor 1&2 switching operation
auf=4
F-7
Motor constant setting guidance
auf=5
E6581611
6