Hitachi PRIMAIDE 1440 Instruction Manual page 120

acquisition begins.
<Scan monitor screen (spectrum acquisition under way)>
SCANNING SPECTRUM NO.: 1 MODE: FL (Em)
Ex: 350 nm Em: *** nm
(v) When the recording of spectral data finishes, the
st
1 monitor screen returns automatically.
(e) Setting of recorder full scale range, speed and memory
No.:
(i) Press the RECORD key and the recorder setting
screen appears.
<Recorder setting screen>
RECORD (RCD RANGE=1, RCD SPEED=2,
1 SPECT RCD=3)
Press numeric key 1 and then the ENT key.
(ii) The recorder full scale setting screen appears.
<Recorder full scale setting screen>
RCD RANGE (1 - 1000)
1000
Press numeric keys 1 0 0 0 and then the ENT
key.
(iii) The 1
(iv) Press the RECORD key. And the recorder
setting screen appears.
<Recorder setting screen>
RECORD (RCD RANGE=1, RCD SPEED=2,
2 SPECT RCD=3)
Press numeric key 2 and then the ENT key.
(v) The recorder speed setting screen will appear.
<Recorder speed setting screen>
RCD SPEED (40 mm/min=1, 60 mm/min=2)
4 - 7
st
monitor screen returns.