Checking The Contents - Hitachi PRIMAIDE 1440 Instruction Manual

5. Checking the Contents

(4) Other Conditions
(a) Avoid placing the instrument near a window where it
would be exposed to direct sunlight. Exposure to
sunlight may cause a degraded performance and/or
discoloration of the painted surfaces.
(b) Protect the instrument from drafts.
(c) Do not allow the instrument to be exposed to any
strong vibration or shock.
(d) Do not place the instrument near equipment that
radiates heat, such as gas burner, electric heater or
oven.
(e) Do not place the instrument near equipment that
generates an intense magnetic field, such as electric
welder, high frequency furnace, pole transformer, etc.
(f) Protect the instrument from excessive dust.
Dust would degrade the performance.
(g) Connect the instrument to a line that is free from abrupt
voltage fluctuations. Such would increase the
detector noise.
(h) If a motor-driven apparatus (such as stirrer or vibrator)
not having a noise suppressing device is connected to
the same power line as this instrument, avoid frequent
ON-OFF operations of that apparatus.
When the unpacking is finished, check the delivered contents
against the packing list that comes with the instrument. If any
part is missing or damaged, or if you have any question, contact
our nearest sales representative or our authorized maintenance
service agents.
APPENDIX 1 - 6