Hitachi PRIMAIDE 1440 Instruction Manual page 16

SAFETY SUMMARY
WARNING precautions in the Manual (Continued)
Electric Shock due to Contact with Inside of Instrument
When removing the xenon lamp cover for part replacement, etc.,
there is a risk of electric shock. Be sure to turn OFF the power switch
and disconnect the power cord from the receptacle in advance.
Electric Shock due to Improper Grounding
This instrument is designed in conformity with the specifications of
Class I in Annex H of the IEC 61010-1 (International Electrotechnical
Commission Standards) – Issue 1.
To prevent an electric shock hazard, provide a proper grounding
connection.
Be sure to use the grounded 3P power cable, which is supplied as a
(a)
standard accessory for the instrument.
The use of a different type of power cable may result in an electric
shock hazard. Connect the 3P power cable to a grounded 3P power
outlet.
If a grounded 3P power outlet is not available, use a grounded 3P
(b)
table tap or a 3P-2P adapter. In this case, be sure to provide proper
grounding connection.
For grounding connection, use a screw having a diameter of M4 or
higher and a turn count of 3 or more in threading, and a wire having a
thickness of 1.25 mm.
Inflammation or Injury due to Toxic, Corrosive or Stimulative Solvent
When using a toxic, corrosive or stimulative solvent, be careful not to
incur a physical inflammation or injury. For details of the properties
of each solvent and how to handle it, refer to the relevant Safety Data
Sheets (SDS). Be sure to handle each solvent properly.
Wear proper protective clothes (e.g., safety goggles) so that a solvent
(a)
will not come into direct with the skin.
Ventilate the laboratory room adequately to prevent accidental
(b)
inhalation of harmful solvent vapor.
WARNING
SAFETY - 4