Hitachi PRIMAIDE 1440 Instruction Manual page 181

6.2 Power Supply
The Primaide1000 Series system is provided with a organizer
which is capable of connecting one pump, one autosampler, and
one detector. The column oven has its own power cord. In an
instance where provision of a single organizer is insufficient for
the use of two detectors, use an AC adapter suitable for each
instrument.
The power cable from the organizer and the AC adapter power
cable should be connected to the power connector equipped on
the left rear side of the instrument.
(1) Isocratic System/Low-Pressure Gradient System (stacked
in one block)
Connect the power cables of the organizer and column
oven to AC power source. For the Primaide1110 pump,
connect the round connector cable from the organizer to the
instrument power connector. For the Primaide1210
autosampler, connect the round connector cable from the
organizer to the instrument power connector.
For the Primaide1410/1430 detector, connect the square
connector cable from the organizer to the instrument power
connector.
Primaide
Organizer
Primaide1410/1430
UV/DAD Detector
Primaide1310
Column Oven
Primaide1210
Autosampler
Primaide1110
Pump
APPENDIX 1 - 9
Square connector
cable
Round connector
cable
Round connector
cable
To AC power
source