Set Up Setting; Communication Channel (Ch) Setting - Hitachi PRIMAIDE 1440 Instruction Manual

3.5 Set Up Setting

3.5.1 Communication channel (CH) setting

Before analytical operation, communication channel (CH) and
liquid crystal display contrast (LCD CONTRAST) need to be set.
• This setting is not required every time. When unnecessary,
skip this setting.
• The default value or currently set value is indicated before
your input.
Set a communication channel via the e-Line in the following way.
(1) Turn on the power switch with the
(2) The following display will be presented.
<Setup initial screen>
SETUP: DETECT
CH1
Press the ENT key.
(3) The following display will be presented.
<Setup items selecting screen>
SETUP ITEMS (DETECTOR=1, CONTRAST=2,
1 EXCHANGE STANDARD=3)
Select DETECTOR.
Press numeric key 1 and then the ENT key.
(4) The following display will be presented.
<Channel selecting screen>
DETECTOR (CH1=1, CH2=2)
1
Select a channel (CH).
Press numeric key 1 or 2 and then the ENT key.
* Default value: 1
* Two channels can be selected for two detectors.
3 - 46
SET UP
UTLTY
THERMO CONTRAST
NO USE 4
key held down.
S. NO.
02AB-111