Parameter Setting - Hitachi PRIMAIDE 1440 Instruction Manual

3.1.2 Parameter setting

(1) For entering a value, press numeric key, then ENT (enter)
key.
(a) Single numeric input
Parameter name
SET PROGRAM
1
Input part
(b) Plural numeric input
Parameter name
LAMP CHANGE (MM, DD, YYYY)
<1 - 12>
Input range
(c) Numericl value selection
Parameter name
TIME CONSTSANT (0.05s=1, 0.1s=2, 0.5s=3
4
Input part
(d) Program setup screen
TIME Ex Em
0.0 250 350
Input procedure
(i) The cursor is indicated on the front line of the
input part. Currently set values are indicated in
the input part.
(ii) Numeric keys and decimal points (.) are accepted
by the upper limit.
3 - 4
Input range
NO.(1 – 9)
Input item
Input part
Selection item
1.0s=4, 2.0s=5, 4.0s=6, 8.0s=7)
Input item
BASE PMT
1 3
Input part
1