Mitsubishi Electric MELDASMAGIC64 Connection Manual page 37

4. NC Card (HR621/HR623/FCU6-HR655) Connection
(2) Following the instructions in the personal computer manual, remove the personal computer cover.
(Note) Follow the precautions instructed in the personal computer manual. Confirm that the
personal computer power is OFF, and that the power cable is disconnected.
(3) After confirming that there is a vacant ISA bus slot, remove the slot cover of the selected ISA bus
slot.
(Note) Do not misplace the slot cover screw as it is used to fix the ISA NC Card onto the personal
computer.
(4) Holding the card installation metal fittings and the ends of the ISA NC Card, so as to push in the
NC Card upper end, insert the card all the way into the personal computer ISA bus slot.
(Note) The ISA BUS slot insertion orientation is predetermined. Insert the card so that the card
mounting fitting comes to the slot cover position.
Press in
(5) Using the fixing screw of the slot cover removed in mounting step 3, fix the ISA NC Card to the
personal computer.
(Note) Securely tighten the screw.
4.4 ISA NC Card Mounting
ISA NC Card
Personal computer ISA bus slot
Press in
25
Card mounting
fitting
Screw