Mitsubishi Electric MELDASMAGIC64 Connection Manual page 81

7.14 Setting of Channel No. when Using Multiple Remote I/O Units
Configuration for <Device assignment example 1> on the previous page
FCU6-DX22* unit
CS2
1
No. of occupied channels: 2
Configuration for <Device assignment example 2> on the previous page
FCU6-DX21* unit
0 1
No. of occupied
channels: 2
(Note) In MELDASMAGIC64, the base I/O unit normally occupies station Nos. 0 and 1.
Both of the examples above are configuration examples when connected to RIO1 (Part
system 1) connectors.
7. Remote I/O Unit Connection
CS1
FCUA-DX10* unit
0
+
2
No. of occupied channels: 1
FCUA-DX11* unit or FCUA-DX12* unit: 3 units
+ +
2 3 4 5
No. of occupied No. of occupied
channels: 2 channels: 2
+
3
No. of occupied channels: 2
Total No. of occupied cannels: 5
+
6 7
No. of occupied
channels: 2
69
FCUA-DX11* unit
or
FCUA-DX12* unit
4
Total No. of occupied channels: 8
(Max. configuration)