Table of Contents
Advertisement
Cable type name: ENC-SP1 cable
Application: Base I/O unit – Spindle drive unit connection
Relay card – Spindle drive unit connection
Assembly drawing
Base I/O unit and
relay card side
(1)(2)(3)
Connection diagram
Base I/O unit,
Relay card side
ENC1A (ENC2A)
1
ENC1A*(ENC2A*)
6
ENC1B (ENC2B)
2
ENC1B*(ENC2B*)
7
ENC1Z (ENC2Z)
3
ENC1Z*(ENC2Z*)
8
4
GND
5
GND
9
+5V
Manufacturing precautions
(1) The wire material shall be a shielded, 6-pair stranded cable equivalent to AWG24 (0.2mm
(2) The parts used shall be Mitsubishi recommended parts. Equivalent parts may be used
providing they are compatible with the specifications.
(3) Attach the nameplate with protective cover stamped with the cable name in the position
designated in the assembly drawing.
(4) Fold the wire material shield on the base I/O unit and relay card side over the sheath, and
wrap copper foil tape over it.
Connect the wound cooper foil tape to the connector's GND plate.
(5) Part No. 5 (plug) and part No. 6 (shell) are solderless types. If soldering types are required,
use parts equivalent to 10120-3000VE for the plug and 10320-52FO-008 for the shell (both
parts manufactured by Sumitomo 3M).
(6) Do not connect a +5V power supply.
Appendix 2 Cable Manufacturing Drawings
2.19 ENC-SP1 Cable (Spindle drive unit)
(4)
Spindle drive unit side
ENC-SP1
(5)(6)
ENC-SP1
Case frame
FG
No. Part name
1
Connector
2
Contact
Connector
3
case
Wire
4
material
5
Plug
6
Shell
Maximum cable length: 50m
Spindle drive unit side
2
12
3
13
4
14
1
5
(Note) Signal names in parentheses
are equivalent to the channel
2 signal names.
100
Appendix 2.19
List of parts used
Recommended part type Qty
Hirose Electric
CDE-9PF
Hirose Electric
CD-PC-111
Hirose Electric
HDE-CTH
Bando Electric Wire
2
DPVVSB 6P × 0.2 mm
Sumitomo 3M
10120-6000EL
Sumitomo 3M
10320-3210-000
1
8
1
(1)
1
1
2
).
Advertisement
Table of Contents
