Mitsubishi Electric MELDASMAGIC64 Connection Manual page 46

List of rotary switches
No. Name
CS1 This is used in the station No. setting of the CF31 and CF33 machine input/output signals.
(14)
(15) CS2 This is used in the station No. setting of the CF32 and CF34 machine input/output signals.
Rotary switch Station
setting value No.
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8~F
LED list
No. Name
24IN This is the LED for the 24VDC input display.
(16)
This is the LED for the onboard remote I/O 1st station
RAL1
(CS1 setting station No.) communication alarm display.
This is the LED for the circuit power 5VDC output
5OUT
display.
(17)
This is the LED for the onboard remote I/O 2nd station
RAL2
(CS2 setting station No.) communication alarm display.
5. Base I/O Unit Connection
5.3 Base I/O Unit Part Names
Device assignment
DI DO
X00~X1F Y00~Y1F
X20~X3F Y20~Y3F
X40~X5F Y40~Y5F
X60~X7F Y60~Y7F
X80~X9F Y80~Y9F
XA0~XBF YA0~YBF
XC0~XDF YC0~YDF
XE0~XFF YE0~YFF
Cannot be used
34
Function
Function
When lit (green) : 24VDC being supplied.
When not lit : 24VDC supply OFF.
When lit (red) : Communication alarm.
When not lit : Normal
When lit (green) : Outputting 5VDC.
When not lit : 5VDC output OFF.
When lit (red) : Communication alarm.
When not lit : Normal