Mitsubishi Electric MELDASMAGIC64 Connection Manual page 41

4. NC Card (HR621/HR623/FCU6-HR655) Connection
(2) Following the instructions in the personal computer manual, remove the personal computer cover.
(Note) Follow the precautions instructed in the personal computer manual. Confirm that the
personal computer power is OFF, and that the power cable is disconnected.
(3) After confirming that there is a vacant PCI bus slot, remove the slot cover of the selected PCI bus
slot.
(Note) Do not misplace the slot cover screw as it is used to fix the PCI NC Card onto the personal
computer.
(4) Holding the card installation metal fittings and the ends of the PCI NC Card, so as to push in the
NC Card upper end, insert the card all the way into the personal computer PCI bus slot.
(Note) There is a set orientation for inserting the PCI NC Card into the PCI bus slot. Insert the card
so that the card installation fitting comes to the slot cover's position.
Press in
Personal computer PCI bus slot
(5) Using the fixing screw of the slot cover removed in mounting step 3, fix the PCI NC Card to the
personal computer.
(Note) Securely tighten the screw.
4.5 PCI NC Card Mounting
PCI NC Card
29
Press in
Card mounting
fitting
Screw