Table of Contents
Advertisement
4.5 PCI NC Card Mounting
4.5.1 Before Mounting the PCI NC Card
(1) Before mounting the PCI NC Card, confirm that the control section items below are present.
FCU6-HR655 unit (PCI bus-compatible NC Card): 1 pc.
FCU6-DX2**, DX3** or DX4** unit
(Base I/O unit: with aluminum die cast): 1 pc.
HR682 card (relay card: L-shaped PCB, with metal spacers): 1 pc.
CR2032 (Toshiba button battery): 1 pc.
F010 cable (half-pitch 50-pole shielded cable): 1 pc.
F011 cable (half-pitch 26-pole shielded cable): 1 pc.
(2) Insert a battery to the PCI NC Card as shown below.
+
-
+
-
-
+
CAUTION
Do not short-circuit, charge, overheat, incinerate or disassemble the battery.
Dispose of the spent battery according to local laws.
4. NC Card (HR621/HR623/FCU6-HR655) Connection
4.5 PCI NC Card Mounting
Insert with the + polarity
facing upward, and
catch with the hook.
Press in vertically.
Check the battery's
polarity indicated on
the holder's metal
section before inserting.
Insert in the direction
of the arrow.
PCI NC Card
27
Battery holder
BAT BAT
(
+
)
HR183
655
Advertisement
Table of Contents
