Appendix 2 Cable Manufacturing Drawings - Mitsubishi Electric MELDASMAGIC64 Connection Manual

Appendix 2 Cable Manufacturing Drawings

No. Appendix No.
1 Appendix 2.1
2 Appendix 2.2
3 Appendix 2.3
4 Appendix 2.4
5 Appendix 2.5
6 Appendix 2.6
7 Appendix 2.7
8 Appendix 2.8
9 Appendix 2.9
10 Appendix 2.10
11 Appendix 2.11
12 Appendix 2.12
13 Appendix 2.13
14 Appendix 2.14
15 Appendix 2.15
16 Appendix 2.16
17 Appendix 2.17
18 Appendix 2.18
19 Appendix 2.19
* For the cables marked with * in the Max. length column:
The cable length (L1) is the length from the NC Card to the base I/O unit and relay card. The cable
length (L2) is the length from the base I/O unit and relay card to each unit. Keep the total cable length
(L1 + L2) within the maximum cable length.
NC card
Symbols for writing cable manufacturing drawing
The following symbols are used in the cable manufacturing drawing.
1.
2.
3.
4. In the cable manufacturing drawings, the partner of the twisted pair cable is given a priority, so the pin Nos. of the
connectors at both end are not necessary in number of order.
5. Equivalent parts can be used for the connector, contact and wire material.
Appendix 2 Cable Manufacturing Drawings
Cable type name table
Cable type
SH21 cable Servo drive unit
SH41 cable Remote I/O
R031 cable Analog input/output
R041 cable Manual pulse generator: 1ch
R042 cable Manual pulse generator: 2ch
R211 cable Remote I/O
R220 cable DC +24V input, emergency stop
R300 cable DI/DO: Single-end connector
R301 cable DI/DO: Double-end connector
F010 cable I/O interface: Base I/O unit
F011 cable I/O interface: Relay card
F020 cable Manual pulse generator: 1ch
F021 cable Manual pulse generator: 2ch
F022 cable Manual pulse generator: 3ch
F040 cable Spindle encoder: Straight
F041 cable Spindle encoder: Right angle
F070 cable DC +24V input, emergency stop
F390 cable RS232C: 1ch
ENC-SP1 cable Spindle drive unit
Maximum cable length
L1
Base I/O unit
F010
Relay card
F011
indicates twist.
indicates the shield sheath.
indicates shield clamping to the ground plate.
Application Max. length
L2
SH21
SV1
SV2
SH41
(R211)
RIO1
RIO2
F040/041
ENC1
F040/041
ENC#2
80
Remarks
* 30m
* 50m
30m
50m
50m
* 50m
30m
50m
50m
20m
15m
50m
50m
50m
* 50m
* 50m
30m
15m
50m
Servo drive unit
Remote I/O unit
Spindle encoder
Spindle encoder