Panasonic BM-ET200 Operating Instructions Manual page 43

Check the Administrator List [Administrator List]
Click the [Administrator List] tab on the "User/Administrator" page. (Refer to pages 37 and 38.)
It is possible to check the administrator information on this page.
[New] button
Registers the administrator.
[No.]
The serial number that shows the number of registered
administrators.
Register Administrators [Administrator List]
Click the [Administrator List] tab on the "User/Administrator" page. (Refer to pages 37 and 38.)
The following is how to register an administrator.
Step 1
Click the [New] button.
→ The "Administrator" screen is displayed.
[User ID]
Displays the administrator's ID.
[Iris Data]
This checkbox is checked when the administrator has a
registered iris data.
[Delete] button
Deletes the administrator.
[Details] button
Displays the detailed administrator information. It is possi-
ble to change the details, but it is impossible to change the
iris data.
Step 2
Complete each setting item displayed in the frame on the
right of the window.
[User ID]
Enter a user ID.
Available characters for the user name: Alphanumeric char-
acters (0-9, A-Z, a-z)
Upper and lower case letters are distinguished.
6 to 16 1-byte characters can be entered.
[Password] [Confirm password]
Enter the password.
Available characters for the user name: Alphanumeric char-
acters (0-9, A-Z, a-z)
Upper and lower case letters are distinguished.
6 to 16 1-byte characters can be entered.
[Iris Data]
"Enrolled" or "Unenrolled" is displayed.
Click the [Capture] button to capture iris image.
Step 3
Click the [Register] button.
→ The administrator data is registered.
Note:
Click the [Cancel] button to cancel registration.
43