Panasonic BM-ET200 Operating Instructions Manual page 76

G How to Change PIN
It is possible to change the registered PIN using the numeric key.
Important:
• Avoid such password as is easily guessed by others.
• Only numerics (0 to 9) can be used for the PIN. Characters other than numerics (*, +, ., etc.) are unavailable.
• Depending on the settings by the system administrators, voice guidance may not be output.
Notes:
• If no operation has been performed for 30 seconds or more, the iris reader will return to the status before operation. In this
case, retry the operation.
• When the [BS] key is pressed, operations performed since the [ENTER] key has been pressed last time can be canceled.
In the following example, the password of User ID "12" is changed from "3456" to "7890".
No.
Press [+] [1] [0] [enter].
• When the input is valid, the short electronic sound "PiPi" is heard.
• When the input is mistaken*, the voice guidance will say, "Registration has been
1
failed.", and the iris reader will return to the status before operation.
Press [1] [2] [enter].
• When the input is valid, the short electronic sound "PiPi" is heard.
• When the input is mistaken*, the voice guidance will say, "Registration has been
2
failed.", and the iris reader will return to the status before operation.
Press [3] [4] [5] [6] [enter].
• When the input is valid, the short electronic sound "PiPi" is heard.
• When the input is mistaken*, the voice guidance will say, "Registration has been
3
failed.", and the iris reader will return to the status before operation.
Press [7] [8] [9] [0] [enter].
• When the input is valid, the short electronic sound "PiPi" is heard.
• When the input is mistaken*, the voice guidance will say, "Registration has been
4
failed.", and the iris reader will return to the status before operation.
76
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept