Panasonic BM-ET200 Operating Instructions Manual page 56

G Delete the PIN
The following is how to delete the PIN of user with the operator's privilege.
Note: After the PIN is deleted, the PIN recognition becomes unavailable.
No.
Press [-] [1] [1] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to delete the PIN.
Example: When the ID is 01, press [0] [1] [enter].
The voice guidance will say, "Registration has been completed."
2
Notes:
• When you delete the PIN of another user, repeat Step 2.
• When the voice guidance says, "Registration has been failed.", retry Step 2.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
3
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
G Give the Operator's Privilege to Users
The following is how to give the operator privilege mode to a user. In advance, user registration by the web browser control is
required. (Refer to p. 42.)
No.
Press [+] [0] [2] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to give the operator's privilege
Example: When ID is 01, press [0] [1] [enter].
The voice guidance will say, "Registration has been completed."
2
Notes:
• When you give the operator privilege mode to other users, repeat this step.
• When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
3
say, "Registration has been failed.", and the iris reader will return to the status before
operation.
56
Procedure
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept