Panasonic BM-ET200 Operating Instructions Manual page 54

G Enroll the User Data
The following is how to enroll the iris data of a user.
No.
Press [+] [0] [1] [enter].
1
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to enroll the iris data.
Example: When the ID is 01, press [0] [1] [enter].
The short electronic sound "PiPi" is heard.
2
Note: When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
Perform iris recognition by following the voice guidance or distance
indicator. (Refer to p. 73.)
After capturing, the voice guidance will say:
3
• "Image capturing completed."
• "Only right eye image is captured."
• "Only left eye image is captured."
Select verify or retry.
Verify the recognition result:
Press [0] [enter].
The voice guidance will say, "Verifying iris data.".
Capture the left eye:
4
Press [1] [enter].
Capture the right eye:
Press [2] [enter].
Capture the both eyes:
Press [3] [enter].
Verify the recognition result.
The voice guidance will say, "Registration has been completed."
Notes:
5
• When the voice guidance says, "Registration has been failed.", retry Step 2.
• When the voice guidance says, "The same iris data already exists.", the user is
already registered with different ID.
• When not verifying the recognition result, press [.] [enter].
54
Procedure
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept
reject accept