Operating Procedures (Instructions For Users); I How To Position Your Eyes In The Mirror - Panasonic BM-ET200 Operating Instructions Manual

Operating Procedures (Instructions for Users)

I How to Position Your Eyes in the Mirror

This iris reader captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range, enroll-
ment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the iris reader as follows
and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye position
in the same way.
Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a
pedestal, etc.
No.
Stand where you can see the iris reader from the
front side.
Stand where you can hold the tilt handles with your
arms bent moderately. If you are standing within the
recognition range, the distance indicator will light up at
the center of the mirror.
1
Notes:
• The recognition range is within approx. 30 cm to
40 cm {0.98 ft. to 1.32 ft.} away from the iris reader.
• The recognition area differs depending on users.
However, the approximate recognition area is
where you can stand holding the tilt handles with
your arms bent moderately.
Hold the tilt handles at the sides of the front panel.
Keep bending your arms moderately while holding the
handles.
2
Make sure that you can see either eye in the mirror.
3
When the eyes are not positioned in the mirror, move to the point where you can see the eyes in the mirror or adjust
the angle of the front panel by holding the tilt handles.
68
Procedure
Tilt handles
Front panel
(Avoid hiding with
a hand or cloth, etc.)
Caution: Take care not to pinch your hands or fingers
between the front panel and the body of this appliance.
Mirror
45 °
Eye image capturing cameras
(Avoid hiding with a hand
or cloth, etc.)